AMD LE-363 User's Guide de l'utilisateur télécharger pdf (Page 188)

100

101

162 XgOS User’s Guide • September 2014

Note – Changing the storage configuration when using VMware might require a

rescan to discover those changes and propagate them to the ESX GUI.

▼ Removing vHBAs Connected to Windows Servers

Hosted in VMware

This procedure applies only to Windows virtual machines that do not use VMFS to

access storage. For regular Windows servers, use the general procedure as listed in

“General Procedure” on page 158.

Use the following procedure to gracefully remove the vHBA:

1. On the Windows server, stop all I/O on the vHBA that you want to remove.

2. Shut down any applications that might attempt to access storage over the

vHBA. Close any windows such as command prompts, Explorer windows, and

shares that are accessing the storage volume.

3. Disable the vHBA on the server:

4. Run the Computer Management application by selecting Start->Run and

entering compmgmt.msc at the command prompt.

5. Click Ok.

6. In the Computer Management window, click Device Manager.

7. Expand SCSI and RAID controllers.

8. Right-click on the entry for the vHBA that you want to delete and select

Uninstall.

9. Confirm the uninstall.

If you get a prompt to reboot the Windows server, the vHBA is still in use and

cannot be removed. Click Cancel and confirm that no applications are using the

storage resources on the vHBA.

For example, check for open command prompts to the disk, no Windows Explorer

windows open displaying the disk, no users or shares connected to the disk. Then

uninstall the vHBA by performing Step 3 again.

1 2 ... 183 184 185 186 187 188 189 190 191 192 193 ... 435 436

Commentaires sur ces manuels

Pas de commentaire

AMD LE-363 User's Guide de l'utilisateur Page 188

Commentaires sur ces manuels